Transmission/Transaxle

Clutch Pressure Plate Bolts* 63 Nm (47 ft. lbs.)
Clutch Pedal Nut 50 Nm (37 ft. lbs.)
Clutch Pedal Bracket Mounting Nuts 27 Nm (20 ft. lbs.)
Clutch Actuator Cylinder Mounting Bolts 12 Nm (106 inch lbs.)
Clutch Anticipate Switch Bracket Retaining Bolts 12 Nm (106 inch lbs.)
Driver Foot Rest Bracket Retaining:
Bolt 8 Nm (71 inch lbs.)
Nut 10 Nm (89 inch lbs.)
Negative Battery Cable Bolt 15 Nm (11 ft. lbs.)



* Must be tightened in sequence, and in even increments over three passes, then tightened to final specification on fourth pass.