Data Display

The Data Display function contains two sets of menus. The menus available depend on the number and type of systems on the vehicle and are listed below:
^ Data Display (ABS)
^ Data Display (TCS)

A brief description of all ABS/TCS data parameters available on the scan tool are listed below:
^ ABS Data:
- Left Front Wheel Speed-scan tool displays: km/h / MPH-Display shows actual wheel speed.
- Right Front Wheel Speed-scan tool displays: km/h / MPH-Display shows actual wheel speed.
- Rear Wheel Speed-scan tool displays: km/h / MPH-Display shows actual wheel speed.
- Brake Switch-scan tool displays: Applied/Released-This parameter indicates the state of the brake switch.
- Valve Relay State-scan tool displays: On/Off-This parameter indicates the state of the valve relay.
- Pump Monitor State-scan tool displays: On/Off-This parameter indicates the state of the return pump relay.
^ TCS Data:
- Left Front Wheel Speed-scan tool displays: km/h / MPH-Display shows actual wheel speed.
- Right Front Wheel Speed-scan tool displays: km/h / MPH-Display shows actual wheel speed.
- Left Rear Wheel Speed-scan tool displays: km/h / MPH-Display shows actual wheel speed.
- Right Rear Wheel Speed-scan tool displays: km/h / MPH-Display shows actual wheel speed.
- Engine Speed-scan tool displays: 0 to 10200 RPM-This is essentially a digital tachometer display.
- Throttle Angle-scan tool displays in percent of throttle open.
- Brake Switch-scan tool displays: Applied/Released-This parameter indicates the state of the brake switch.
- TCS Switch State-scan tool displays: On/Off-This parameter indicates the state of the traction control switch.
- Valve Relay State-scan tool displays: On/Off-This parameter indicates the state of the valve relay.
- Pump Monitor State-scan tool displays: On/Off-This parameter indicates the state of the return pump relay.
- Vehicle Speed-scan tool displays: km/h / MPH-Display shows actual vehicle speed.
- TCS Status EBTCM-scan tool displays: Inable/Disable-This parameter indicates the state of the Traction Control System (TCS) based on if the operator has disabled TCS by pressing the TCS On/Off switch, or if the TCS is disabled because of a malfunction.
- TCS State EBTCM-scan tool displays: Active/Inactive-This parameter indicates if the TCS is currently in a TCS event or not.