Installation Procedure

Description:

1. Install the SDM (1) to the SDM bracket (2).

NOTICE: Refer to Fastener Notice in Vehicle Damage Warnings.

2. Install the SDM mounting fasteners (4).
Tighten
Tighten fasteners to 6 N.m (53 lb in).

Description:

3. Install the SDM harness connector to the SDM.

Description:

4. Install the Connector Position Assurance (CPA) to the SDM harness connector.
5. Install the carpet and the passenger front carpet retainer.
6. Install the passenger front seat.
7. Enable the SIR system. Refer to Enabling the SIR System.