Power Window Motor: Service and Repair

REMOVAL PROCEDURE
1. Remove the window regulator.
2. Remove the window regulator motor bolts.
3. Remove the window regulator motor from regulator.

INSTALLATION PROCEDURE

IMPORTANT: The window regulator motor may be installed with the regulator in any position.

1. Install the window regulator motor to the regulator.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the window regulator motor bolts.

Tighten
Tighten the window regulator motor bolts to 10 N.m (89 lb in).

3. Install the window regulator.