A Symptoms - Antilock Brake System

Important:
1. Perform the A Diagnostic System Check - ABS before using the Symptom Tables in order to verify that all of the following are true:
^ There are no DTCs set.
^ The control module(s) can communicate via the serial data link.
2. Review the system operation in order to familiarize yourself with the system functions. Refer to ABS Operation.

Visual/Physical Inspection
^ Inspect for aftermarket devices which could affect the operation of the ABS System.
^ Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
^ Inspect the brake fluid reservoir for the proper brake fluid level.

Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. refer to Testing for Intermittent and Poor Connections in Diagnostic Aids under Diagrams.

Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
^ No Communication with EBCM/EBTCM No Communication With EBCM/EBTCM
^ ABS Indicator Always On ABS Indicator Always On
^ ABS Indicator Inoperative ABS Indicator Inoperative
^ TRAC OFF Indicator Always On Trac Off Indicator Always On
^ TRAC OFF Indicator Inoperative Symptom Related Diagnostic Procedures