Power Steering Pressure Hose Replacement

Power Steering Pressure Hose Replacement

Removal Procedure
1. Raise the vehicle on a hoist.





2. Remove the front exhaust pipe with the catalytic converter, automatic transmission only.
3. Remove the power steering pressure hose (1) from the power steering gear (3).





4. Lower the vehicle.
5. Remove the upper air cleaner assembly.
6. Remove the power steering pressure hose (3) from the power steering pump pipe (4).
7. Remove the power steering pressure hose (3) from the vehicle.

Installation Procedure






1. Notice:
Refer to Installing Hoses Without Twists or Bends Notice in Service Precautions.

Install the power steering pressure hose (3) to the vehicle.

2. Notice:
Refer to Fastener Notice in Service Precautions.

Install the power steering pressure hose (3) to the power steering pump pipe (4).
^ Tighten the fitting to 27 Nm (20 ft. lbs.).
3. Install the upper air cleaner assembly.
4. Raise the vehicle on a hoist.
5. Install the front exhaust pipe with the catalytic converter, if removed.





6. Install the power steering pressure hose (1) to the power steering gear (3).
^ Tighten the fitting to 27 Nm (20 ft. lbs.).
7. Lower the vehicle.
8. Bleed the power steering system.