Fog/Driving Lamp Switch: Service and Repair

FOG LAMP SWITCH REPLACEMENT - FRONT

REMOVAL PROCEDURE




1. Remove the instrument panel (I/P) cluster trim panel to access the fog lamp switch.
2. Release the retainers on the fog lamp/dimmer switch housing using a small flat-bladed tool.
3. Remove the fog lamp/dimmer switch (3) housing from the I/P cluster trim panel.

INSTALLATION PROCEDURE




1. Install the fog lamp/dimmer switch (3) housing to the I/P cluster trim panel, pressing into place until fully seated.
2. Install the to the I/P cluster trim panel.