Front Side Door Lock Replacement

Front Side Door Lock Replacement

Removal Procedure






Caution: Refer to Battery Disconnect Caution.

1. Disconnect the negative battery cable.
2. Remove the water deflector.
3. Disconnect the inside door handle and the lock rods.




4. Disconnect the outside door handle and the lock rods.




5. Remove the outside door handle.




6. Remove the bolts and the guide rail.
7. Remove the screws and the front door lock.
8. Disconnect the electrical connector.

Installation Procedure




1. Connect the electrical connector.
2. Connect the inside door handle and the lock rods.
3. Connect the outside door handle and the lock rods.

Notice: Refer to Fastener Notice.

4. Install the front door lock with the screws.

Tighten the front door lock screws to 8 N.m (71 lb in).

5. Install the guide rail with the bolts.

Tighten the guide rail bolts to 7 N.m (62 lb in).

6. Install the water deflector.
7. Connect the negative battery cable.