Headlamp: Service and Repair

Headlamp Replacement

Removal Procedure




1. Remove the fascia grille.
2. Remove the headlamp mounting bolts.
3. Disconnect the electrical connectors.




4. Remove the headlamp assembly.
5. Remove the cap concealing the headlamp bulb.
6. Disconnect the headlamp bulb electrical connector.
7. Remove the retaining wire.
8. Remove the headlamp bulb.

Installation Procedure




1. Install the headlamp bulb.
2. Install the retaining wire.
3. Connect the headlamp bulb electrical connector.
4. Install the cap concealing the headlamp bulb.




5. Connect the electrical connectors.

Notice: Refer to Fastener Notice.

6. Install the headlamp assembly with the bolts.

Tighten the headlamp assembly bolts to 6 N.m (53 lb in).

7. Install the fascia grille.