Crankshaft Position Sensor: Service and Repair

Crankshaft Position Sensor Replacement

Removal Procedure






Caution: Refer to Battery Disconnect Caution.

1. Disconnect the negative battery cable.
2. Disconnect the crankshaft position (CKP) sensor electrical connector.




3. Remove the CKP sensor bolt.
4. Remove the CKP sensor.

Installation Procedure






Notice: Refer to Fastener Notice.

1. Install the CKP sensor with the bolt.

Tighten the CKP sensor bolt to 6.5 N.m (58 lb in).




2. Connect the CKP sensor electrical connector.
3. Connect the negative battery cable.