Cabin Temperature Sensor / Switch: Service and Repair

Inside Air Temperature Sensor Replacement

Removal Procedure






Caution: Refer to Battery Disconnect Caution.

1. Disconnect the negative battery cable.
2. Remove the instrument panel assembly.
3. Disconnect the electrical connector.
4. Remove the retaining screws.
5. Remove the air inlet tube.
6. Remove the inside air temperature sensor.

Installation Procedure




1. Install the inside air temperature sensor with the retaining screws and tighten.
2. Install the air inlet tube and connect the electrical connector.
3. Install instrument panel assembly.
4. Connect the negative battery cable.