Inflatable Restraint Front End Sensor Replacement

Inflatable Restraint Front End Sensor Replacement

Removal Procedure






Caution: Refer to Sensing and Diagnostic Module Voltage after Ignition is Turned Off Caution.

Caution: Refer to Battery Disconnect Caution.

1. Disconnect the negative battery cable.
2. Disconnect the connector (1) from the front air bag sensor (3).
3. Remove the front air bag sensor mounting bolt (2).
4. Remove the front air bag sensor.

Installation Procedure




1. Install the front air bag sensor.

Notice: Refer to Fastener Notice.

2. Install the front air bag sensor mounting bolt (2).

Tighten the side air bag sensor mounting bolts to 10 N.m (89 lb in).

3. Connect the connector (1) to the front air bag sensor (3).
4. Connect the negative battery cable.