Front Suspension

Wheel Hub, Bearing, Knuckle, and Seal Replacement

Tools Required
* 500-20 Hex Nut
* J 36661-2 Forcing Screw
* J 37105-1 Support Bridge
* J 37105-2 Bearing Adapter
* J 37105-3 Hub Adapter

Disassembly Procedure




1. Remove the drive axle from the front wheel hub.
2. Remove the inner snap ring.




3. Remove the wheel hub with the J 37105-1, the J 37105-3, the 500-20, and the J 37105-2.




4. Remove the disc brake splash.
5. Remove the outer snap ring.




6. Remove the wheel bearing with the J 37105-1, the J 37105-2, the 500-20, and the J 36661-2.
7. Clean the bore of the knuckle.

Assembly Procedure




1. Install the outer snap ring and push the wheel bearing into place with the J 37105-1, the J 37105-2, the 500-20, and the J 36661-2.




2. Install the disc brake splash.
3. Install the inner snap ring and push the wheel hub into place with the J 37105-3, the J 37105-2, the 500-20, and the J 36661-2.
4. Install the drive axle into the front wheel hub.