Gearshift Lever Case Replacement

Gearshift Lever Case Replacement

Removal Procedure




Caution: Refer to Battery Disconnect Caution.

1. Disconnect the negative battery cable.
2. Remove the rod clamp.
3. Remove the console.
4. Remove the gearshift lever housing bolts and the gearshift lever housing.

Installation Procedure





Notice: Refer to Fastener Notice.

1. Install the gearshift lever housing and the gearshift lever housing bolts.

Tighten the gearshift housing bolts to 7 N.m (62 lb in).

2. Adjust the shift linkage.
3. Install the console.
4. Connect the negative battery cable.