Y4M - Manual Transaxle

Gearshift Control Lever Replacement

Removal Procedure




1. Remove the floor console.
2. Disconnect the select and shift control cable.
3. Remove the gear shift control lever bolts and assembly.

Installation Procedure





Notice: Refer to Fastener Notice.

1. Install the gear shift control lever assembly and bolts (1).

Tighten the bolts to 4-7 N.m (35-62 lb in).

2. Adjust the select cables. Refer to Shift Control Cable Replacement.
3. Connect the select and shift control cable.
4. Install the floor console.