Rear Side Door Window Replacement

Rear Side Door Window Replacement

Removal Procedure




1. Remove the rear door trim panel.
2. Remove the outside channel molding.
3. Remove the interior rear door garnish molding.
4. Remove the screws and the exterior rear door garnish molding.




5. Remove the door seal trim.
6. Remove the screws that secure the glass to the window regulator.




7. Remove the bolts and the guide rail.
8. Remove the glass from the door.

Installation Procedure




1. Install the glass in the door.

Notice: Refer to Fastener Notice.

2. Install the guide rail and the bolts.

Tighten the guide rail bolts to 7 N.m (62 lb in).




3. Position the glass within the window regulator.
4. Install the glass screws.

Tighten the door glass screws to 7 N.m (62 lb in).




5. Install the door seal trim.
6. Install the exterior rear door garnish molding with the screws.

Tighten the exterior rear door garnish molding screws to 1.5 N.m (13 lb in).

7. Install the interior rear door garnish molding.
8. Install the outside channel molding.
9. Install the rear door trim panel.