Windshield Washer Reservoir: Service and Repair

Washer Pump/Reservoir Replacement

Removal Procedure

Caution: Refer to Battery Disconnect Caution.

1. Disconnect the negative battery cable.
2. Remove the front left wheel.




3. Remove the bolts and the front wheel well splash shield.




4. Disconnect the washer hoses from the reservoir.
5. Disconnect the reservoir pump electrical connectors.
6. Remove the bolts, the nuts and the reservoir.

Installation Procedure





Notice: Refer to Fastener Notice.

1. Install the reservoir with the nuts and the bolts.

Tighten the washer fluid reservoir nuts and bolts to 9 N.m (80 lb in).

2. Connect the reservoir pump electrical connectors.
3. Connect the washer hoses to the reservoir.




4. Install the front wheel well splash shield with the bolts.

Tighten the front wheel well splash shield bolts to 1.5 N.m (13 lb in).

5. Install the front left wheel.
6. Connect the negative battery cable.