Scan Tool Data Definitions

Scan Tool Data Definitions

8-Digit GM Part Number
- The scan tool displays an 8 digit alphanumeric number. The part number of the module.

AM Pass A Stop Level
- This is the first pass stopping level for the seek/scan feature. If nothing is found above this level, the radio will then go to the AM Pass B Stop Level.

AM Pass B Stop Level
- This is the second pass stopping level for the seek/scan feature.

Audio Software Version
- The scan tool displays 0-9999. The identification number of the radios internal PROM.

Auto Volume Control
- The scan tool displays On/Off. The state of the auto volume control function.

Band Number
- The scan tool displays AM/FM1/FM2. The current band that the radio is in.

Calibration ID
- The scan tool displays 0-9999. The number designating what calibrations the radio contains.

Driver Number
- The scan tool displays 1-2. The memory position the driver has selected as received by class 2 lines.

FM Pass A Stop Level
- This is the first pass stopping level for the seek/scan feature. If nothing is found above this level, the radio will then go to the FM Pass B Stop Level.

FM Pass B Stop Level
- This is the second pass stopping level for the seek/scan feature.

Ign. Cycles Since Last DTC
- The scan tool displays the number of ignition cycles since the last DTC was set.

Language
- The scan tool displays what language is being displayed on the radio.

Navigation Software Version
- The scan tool displays 0-9999. The identification number of the radios internal PROM.

Point of Sale
- The scan tool displays the country the vehicle was sold in.

Power Mode
- The scan tool displays what power mode the module is on.

Power Mode Config.
- The vehicle configuration that the radio is set up for (Deville, Seville, or Eldorado).

Region Code
- The scan tool displays the region the radio is set for (US, Asia, Australia, Europe, Saudi).

Signal Strength
- The scan tool displays 0-255 decibels. The strength of the station that the radio is tuned to.

Source Selected
- The scan tool displays which sound source has been selected (Tuner, Cassette, CD/MD, CDX, Phone, Radio Off).

Theft Lock Status
- The scan tool displays Active/Inactive. The scan tool displays active when the radio receives the incorrect VIN number across Class 2 lines.

Total CD/MD Hours
- The scan tool displays 0-999 hrs. The total number of hours the CD/MD player has been used.

Total Radio Hours
- The scan tool displays 0-999 hrs. The total number of hours the radio has been used.