Folding Top Cover Replacement

Folding Top Cover Replacement

Removal Procedure




1. Remove the compression seal panel from the #1 bow.
2. Remove both side rail weatherstrips and retainers.
3. Remove the tension cable.
4. Remove the top material from the #5 bow.
5. Disconnect rear window heated glass electrical connection.
6. Pull top material out of the #2, #3 and #4 bows.

Installation Procedure




1. Slide the top cover through the #2, #3 and #4 roof bows.
2. Attach the rear window electrical connector.
3. Attach the top cover to the #5 bow by pressing seam into the #5 bow groove.
4. Install tension cable.
5. Install both side rail weatherstrips and retainers.




6. Install compression seal panel.