Brake Switch (Cruise Control): Service and Repair

Clutch Pedal Cruise Control Release Switch Replacement

Removal Procedure






Caution: Refer to Battery Disconnect Caution.

1. Disconnect the negative battery cable.
2. Remove the LH instrument panel (I/P) lower insulator panel.
3. Disconnect the clutch cruise control release switch electrical connector.




4. Remove the clutch cruise control release switch from the bracket.

Installation Procedure




1. Install the clutch cruise control release switch to the bracket.
2. Fully seat the switch to the bracket.
Audible clicks will be heard while pushing the switch.




3. Rotate the threaded switch to adjust it to the closed position when the clutch pedal is fully released.
4. Connect the clutch cruise control release switch electrical connector.
5. Install the LH I/P lower insulator panel.
6. Connect the negative battery cable.