Radiator Cooling Fan Control Module: Service and Repair

Cooling Fan Control Module Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.




2. Disconnect the cooling fan control module electrical connector.




3. Remove the cooling fan control module retaining bolt.
4. Remove the cooling fan control module from the vehicle.

Installation Procedure




1. Install the cooling fan control module to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the cooling fan control module retaining bolt.

Tighten the bolt to 6 N.m (53 lb in).




3. Connect the cooling fan control module electrical connector.
4. Lower the vehicle.
5. Refer to Programming and RelearningProgramming and Relearning