Inflatable Restraint Side Impact Module Wiring Harness Replacement

Inflatable Restraint Side Impact Module Wiring Harness Replacement

Removal Procedure

Caution: Refer to SIR Inflator Module Handling and Storage Caution.

1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Remove the side impact inflator module from the seat.




3. With the seat back cover in the open position the wiring harness on the side impact inflator module will be exposed.
Remove the retaining clips that secure the inflator module wiring harness to the seat.
4. Remove the wiring harness.

Installation Procedure




1. Install the new inflator module wiring harness to the seat. Install the retaining clips that secure the wiring harness to the seat.
2. Install the side impact inflator module to the seat.
3. Enable the SIR system. Refer to SIR Disabling and Enabling.