Inflatable Restraint Side Impact Sensor Replacement

Inflatable Restraint Side Impact Sensor Replacement

Removal Procedure

Caution: Refer to SIR Inflator Module Handling and Storage Caution.

1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Remove the front side door trim panel.




3. Remove the retaining bolts from the inflatable restraint side impact sensor.
4. Remove the sensor from the vehicle.

Installation Procedure




1. Install the sensor to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the retaining bolts to the inflatable restraint side impact sensor.

Tighten the bolts to 9 N.m (80 lb in).

3. Install the front side door trim panel.
4. Enable the SIR system. Refer to SIR Disabling and Enabling.