Flexplate Replacement

Flexplate Replacement

Removal Procedure




1. Remove the driveline support assembly and separate it from the transmission.
2. Remove the bolts mounting the flexplate to the flexplate spindle.
3. Remove the flexplate.

Installation Procedure




1. Position the flexplate to the flexplate spindle so that the side of the flexplate marked CONVERTER SIDE will face the transmission torque converter.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the flexplate to flexplate spindle bolts.

Tighten the flexplate to flexplate spindle bolts to 50 N.m (37 lb ft).

3. Install the driveline support assembly to the transmission and the vehicle.