Counter Gear Shaft Disassemble (Z06 and SSR)

Counter Gear Shaft Disassemble (Z06 and SSR)

Tools Required
* J 22912-O1 Split Plate
* J 39473 Mainshaft Bearing Installer
* J 39511 Split Plate
* J 39547 Press Adapter

Important: Do not replace tapered bearings unless inspection shows bearing damage.




1. Remove the small tapered bearing, using the J 22912-O1 (1) with the J 39473 (2) and a hydraulic press.
2. Discard the small tapered bearing.




3. Remove the large tapered bearing, using the J 39511 (2), the J 39547 (1), and a hydraulic press.
4. Discard the large tapered bearing.