Auxiliary Engine Oil Cooler Replacement

Auxiliary Engine Oil Cooler Replacement

Removal Procedure

1. Remove the upper air baffle.
2. Remove the right engine splash shield.
3. Remove the lower air baffle.
4. Remove the support clip from the engine oil cooler lines.
5. Reposition the hose clamps on the power steering cooler lines.
6. Remove the power steering oil cooler lines from the power steering cooler.
7. Remove the engine oil cooler lines from the engine oil cooler.




8. Remove the upper bolt (1) from the engine oil cooler/power steering cooler.
9. Remove the lower bolts (2) from the engine oil cooler/power steering cooler.
10. Remove the engine oil cooler/power steering cooler from the vehicle.

Installation Procedure




1. Install the engine oil cooler/power steering cooler to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the upper bolt (1) to the engine oil cooler/power steering cooler bracket.

Tighten the bolt to 2 N.m (18 lb in).

3. Install the lower bolts (2) to the engine oil cooler/power steering cooler bracket.

Tighten the bolts to 2 N.m (18 lb in).

4. Install the engine oil cooler lines to the engine oil cooler.
5. Install the power steering oil cooler lines to the power steering cooler.
6. Reposition the hose clamps on the power steering cooler lines.
7. Install the support clip to the engine oil cooler lines.
8. Install the right engine splash shield.
9. Install the lower air baffle.
10. Install the upper air baffle.
11. Add the proper amount of engine oil and power steering fluid.