10. Intake Manifold Removal

Intake Manifold Removal





Important:
* The intake manifold, throttle body, fuel injection rail, and fuel injectors may be removed as an assembly. If not servicing the individual components, remove the manifold as a complete assembly.

* DO NOT use the intake manifold-to-cylinder head gaskets again.

Remove the manifold absolute pressure (MAP) sensor (714) and bolt (736).
* Remove the seal (715) from the sensor, as required.




* Remove the intake manifold bolts (512).
* Remove the intake manifold (500).




* Remove the intake manifold gaskets (514).
* Discard the intake manifold gaskets.