First Design

Timing Chain and Sprockets Removal (First Design)

Tools Required
* J 8433 Two Jaw Puller
* J 41558 Crankshaft Sprocket Remover
* J 41816-2 Crankshaft End Protector





Notice: Do not turn the crankshaft assembly after the timing chain has been removed in order to prevent damage to the piston assemblies or the valves.

1. Remove the camshaft sprocket bolts (206).
2. Remove the camshaft sprocket (205) and timing chain (208).




3. Remove the bolts (231) and chain dampener (232).




4. Use the J 41816-2 (1), the J 41558 (2), and the J 8433 (4) in order to remove the crankshaft sprocket.




5. Remove the crankshaft sprocket.




6. Remove the crankshaft sprocket key, as required.