B1015

DTC B1015

Circuit Description

The internal fault detection is handled inside the control module. No external circuits are involved.

DTC Descriptor

This diagnostic procedure supports the following DTC:

DTC B1015 Vehicle Identification Number (VIN) Information Error

This vehicle has DTCs which include DTC Symptoms. For more information on DTC Symptoms, refer to DTC Symptom Description.






Conditions for Running the DTC

The vehicle power mode is in Accessory, Run or RAP.

Conditions for Setting the DTC

A VIN matching test in the module fails to match the broadcast VIN stored at the vehicle assembly.

Action Taken When the DTC Sets

The DVD System is disabled.

Conditions for Clearing the DTC

* A current DTC clears when the error is no longer present.
* A history DTC clears when the module ignition cycle counter reaches the reset threshold, without a repeat of the malfunction.

Diagnostic Aids

* This DTC may be stored as a history DTC without affecting the operation of the module. If stored only as a history DTC and not retrieved as a current DTC, do not replace the module.
* If this DTC is retrieved as both a current and history DTC, replace the module.

Circuit/System Testing

Ignition ON, scan tool installed, retrieve the DTC's.

If DTC B1015 is current, replace the DVD Player.

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure. Verification Tests

Control Module References