C0896
DTC C0896
Circuit Description
The power steering control module (PSCM) has a discrete battery positive voltage supply circuit. The PSCM monitors the voltage level on this circuit to ensure the power steering system has adequate voltage levels to perform the system functions.
DTC Descriptor
This diagnostic procedure supports the following DTC:
DTC C0896 Device Voltage Range/Performance
This vehicle has DTCs which include DTC symptoms. For more information on DTC symptoms, refer to DTC Symptom Description.
Conditions for Running the DTC
The ignition is ON, with the engine ON.
Conditions for Setting the DTC
Power steering system battery voltage is 9-10 volts for at least one second.
Action Taken When the DTC Sets
* DTC C0896 00 is stored in memory.
* Steering assist is slightly reduced.
Conditions for Clearing the DTC
* A current DTC will clear when power steering system voltage is greater than 10 volts for more than one second.
* A history DTC will clear after 100 consecutive ignition cycles with the power steering system voltage greater than 10 volts.
Test Description
The number below refers to the step number on the diagnostic table.
2. This step tests if the voltage malfunction is in the Power Steering System.
