Knee Bolster Replacement

Knee Bolster Replacement

Removal Procedure

1. Remove the instrument panel (I/P) left outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement .
2. Remove the I/P left trim panels. Refer to Instrument Panel Trim Panel Replacement - Left Side .
3. Remove the left closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
4. Remove the knee bolster screws.




5. Remove the knee bolster.



Installation Procedure





1. Install the knee bolster.

Notice: Refer to Fastener Notice .

2. Tighten the knee bolster screws.

Tighten the screws to 2.5 N.m (22 lb in).

3. Install the left closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
4. Install the I/P left trim panels. Refer to Instrument Panel Trim Panel Replacement - Left Side .
5. Install the I/P left outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement .