Rear Seat Cushion Cover and Pad Replacement

Rear Seat Cushion Cover and Pad Replacement

Removal Procedure

1. Remove the seat back cover and pad.
2. If you are replacing the 60 percent side, perform the following steps:
1. Remove the center seat belt retractor.
2. Remove the seat back hinge trim.




3. Release the J-straps and remove the rear cushion closeout.




4. Remove the J-straps on the cushion cover. Remove the cushion cover and pad from the seat frame.




5. Unfasten the hog rings to remove the cushion cover from the pad.

Installation Procedure




1. Fasten the hog rings to Install the cushion cover to the pad.




2. Install the cushion cover and pad to the seat frame. Attach the J-straps on the cushion cover.




3. Install the rear cushion closeout to the seat frame.
4. If you are installing the 60 percent side, perform the following steps:
1. Install the seat back hinge trim.
2. Install the center seat belt retractor.

5. Install the seat back cover and pad.