Evaporative Emission Control Canister: Service and Repair

Evaporative Emission Canister Replacement

Removal Procedure




1. Remove the fuel tank.
2. Disconnect the evaporative emission (EVAP) canister vent pipe quick connect fitting (2) from the EVAP canister.
3. Disconnect the EVAP canister pipe quick connect fitting (3) from the EVAP canister vent solenoid valve.




4. Disconnect the EVAP canister purge pipe quick connect fitting from the EVAP canister.
5. Remove the EVAP canister purge pipe.




6. Remove the EVAP canister bolt.
7. Slide up and remove the EVAP canister.

Installation Procedure




1. Position and install the EVAP canister.
2. Install the EVAP canister bolt.

Tighten the bolt 3.5 N.m (31 lb in).




3. Install the EVAP canister purge pipe.
4. Connect the EVAP canister purge pipe quick connect fitting to the EVAP canister.




5. Connect the EVAP canister pipe quick connect fitting (3) to the EVAP canister vent solenoid valve.
6. Connect the EVAP canister vent pipe quick connect fitting (2) to the EVAP canister.
7. Install the fuel tank.