Body - Sound Deadener Peeling In Wheel Well Area
Bulletin No.: 07-08-61-002ADate: June 20, 2007
TECHNICAL
Subject:
Sound Deadener Peeling In Wheel Well Area (Clean and Reapply Coating)
Models:
2006-2007 Buick Terraza
2006-2007 Chevrolet Express, Malibu, Malibu MAXX, Uplander
2006-2007 GMC Savana
2006-2007 Pontiac Montana SV6 (Canada)
2006-2007 Saturn Relay
Supercede:
This bulletin is being revised to add the 2006 model year and the Saturn Relay model. Please discard Corporate Bulletin Number 07-08-61-002 (Section 08 - Body and Accessories).
Condition
Some customers may comment that the sound deadener is peeling off in the wheel well area.
Correction
Clean and reapply coating.
Use a Power wash to remove all of the sound deadener from the wheel wells. If necessary, use a plastic scraper to aid in removing the material without breaking though the paint.
Use *3M(TM) Scotch-Brite imperial Paint Prep Scuff Pad Maroon, P/N 07777, to scuff the paint surface. The surface must be clean and dry.
Apply *3M(TM) No Cleanup Water-Based Undercoating Black, P/N 08804, to the area.
*We believe this source and their products to be reliable. There may be additional manufacturers of such products.
General Motors does not endorse, indicate any preference for or assume any responsibility for the products from this firm or for any such items which may be available from other sources."
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer