Rear Seat Replacement (40 Percent Side)

Rear Seat Replacement (40 Percent Side)

Removal Procedure





1. Remove the front mounting bolts.
2. Move the seat full forward and fold the seat back down.




3. Remove the seat belt anchor bolt from the seat frame.




4. Remove the rear mounting bolts.
5. Remove the seat.



Installation Procedure





1. Install the seat to the vehicle.

Notice: Refer to Fastener Notice .

2. Install the rear mounting bolts.

Tighten the bolts to 35 N.m (25 lb ft).





3. Install the seat belt anchor bolt to the seat frame.

Tighten the bolt to 35 N.m (25 lb ft).

4. Move the seat full rearward and open the seat back up.




5. Install the front mounting bolts.

Tighten the bolts to 35 N.m (25 lb ft).