97. Coolant Crossover Pipe Installation

Coolant Crossover Pipe Installation




1. Install the coolant crossover pipe assembly onto the engine.

Notice: Refer to Fastener Notice.

2. Install the engine lift bracket (1) and the front coolant crossover pipe bolts (3).

Tighten the bolts to 50 N.m (37 lb ft).

3. Install the side coolant crossover pipe bolt (2).

Tighten the bolt to 10 N.m (89 lb in).




4. Install the idler pulleys and bolts.
^ Tighten the bolts (1) to 50 N.m (37 lb ft).
^ Tighten the bolt (2) to 30 N.m (22 lb ft).




5. Install the coolant vent pipe and bolt (2).

Tighten the bolt to 10 N.m (89 lb in).

6. Install the heater inlet/outlet pipe and bolt (1).

Tighten the bolt to 10 N.m (89 lb in).

7. Install the thermal bypass hose and securely fasten the clamp (3).