Shock Absorber Replacement (Sedan)

Shock Absorber Replacement (Sedan)

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel.
3. Using a suitable jack stand, raise the rear knuckle to remove spring tension.




4. Remove the lower shock bolt.




5. Remove the upper shock bolt.
6. Remove the shock from the vehicle.

Installation Procedure

1. Position the shock in the vehicle.





Notice: Refer to Fastener Notice.

2. Install the upper shock absorber to body bolt.

Tighten the bolts to 90 N.m (66 lb ft).




3. Install the shock absorber to knuckle bolt.

Tighten the bolt to 180 N.m (133 lb ft).

4. Remove the jack stand from the rear knuckle.
5. Install the tire and wheel.
6. Lower the vehicle.