Sealing Strip Replacement - Front Door Window Belt Inner

Sealing Strip Replacement - Front Door Window Belt Inner

Removal Procedure




1. Lower the front door window.
2. Remove the front door trim panel.
3. Remove the inner window sealing strip by lifting the strip off the pinch-weld flange.

Installation Procedure




1. Position both ends of the inner window sealing strip to the pinch-weld flange with the center of the sealing strip slightly bent upward.

Important: Do not overstuff the sealing strip ends in an attempt to avoid puckers in the top lip.

2. Engage each end of the sealing strip by pressing firmly onto the front and the rear ends of the weld flange working toward the center.
3. Install the front door trim panel.
4. Raise the front door window.