Garage Door Opener Transmitter: Service and Repair

Garage Door Opener Replacement

Removal Procedure

1. Remove the overhead console.




2. Remove the fasteners from the garage door opener.
3. Disconnect the electrical connector and remove the garage door opener.

Installation Procedure




1. Install the garage door opener and connect the electrical connector.

Notice: Refer to Fastener Notice.

2. Install the fasteners to the garage door opener.

Tighten the fastener to 2.5 N.m (22 lb in).

3. Install the overhead console.
4. Program the garage door opener after replacement. Refer to Control Module References.