Front Fog Lamp Replacement (Base)

Front Fog Lamp Replacement (Base)

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.




2. Disconnect the electrical connector from the front fog lamp assembly.
3. Twist the bulb about 1/4 turn counterclockwise.




4. Remove the fog lamp bulb from the lamp housing.




5. Remove the nuts mounting the front fog lamp assembly to the lower grille.




6. Remove the fog lamp assembly from the lower grille.

Installation Procedure




1. Install the fog lamp assembly to the lower front grille.






Notice: Refer to Fastener Notice.

2. Install the front fog lamp mounting nuts.

Tighten the nuts to 2.5 N.m (22 lb in).




3. Install the fog lamp bulb into the lamp housing.
4. Twist the bulb about 1/4 turn clockwise to lock the bulb into the housing.




5. Connect the electrical connector to the fog lamp assembly.
6. Lower the vehicle.
7. Inspect the fog lamp alignment. Adjust the alignment if necessary. Refer to Fog Lamp Aiming. Adjustments