LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Malibu V6-3.9L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 4T45-E Automatic Transaxle >> Removal >> Output Shaft Removal

Output Shaft Removal



Output Shaft Removal

Tools Required
* J 6125-1B Slide Hammer with Adapter
* J 38868 Output Shaft Assembly Remover and Installer




1. Remove the snap ring (57).




2. Install the J 6125-1B and J 38868 on the output shaft (94).
3. Use a screw driver to pry up on the shaft to take up the slack, then pull up on the slide hammer.


scientia non olet · About LEMON Manuals