Trunk / Liftgate Latch: Service and Repair

Rear Compartment Lid Latch Replacement

Removal Procedure




Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution).
1. Disconnect the negative battery cable.
2. Remove the screws and the luggage compartment lock.
3. Disconnect the electrical connector.
4. Disconnect the lock rod.
5. Disconnect the cable from the lock.


Installation Procedure




1. Connect the cable to the lock.
2. Connect the lock rod.
3. Connect the electrical connector.

Notice: Refer to Fastener Notice (Fastener Notice).

4. Install the luggage compartment lock with the screws.

Tighten the luggage compartment lock screws to 6 N.m (53 lb in).

5. Connect the negative battery cable.