Rear Compartment Lid Lock Cylinder Replacement (Notchback)

Rear Compartment Lid Lock Cylinder Replacement (Notchback)

Removal Procedure




Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution).
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).
2. Remove the clips and the rear compartment lid trim.
3. Disconnect the electrical connector.
4. Disconnect the lock rod.
5. Remove the bolt and the lock cylinder.


Installation Procedure





Notice: Refer to Fastener Notice (Fastener Notice).

1. Install the lock cylinder with the bolt.

Tighten the luggage compartment lock cylinder bolt to 4 N.m (35 lb in).

2. Connect the lock rod.
3. Install the rear compartment lid trim with the clips.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).