Front Floor Console Replacement (Notchback)

Front Floor Console Replacement (Notchback)

Removal Procedure




Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution).
1. Disconnect the negative battery cable.
2. Remove the gearshift lever boot, if equipped.




3. Remove the screws from the floor console.
4. Remove the floor console cover.
5. Remove the parking brake cover.
6. Disconnect the electrical connector.
7. Remove the floor console.


Installation Procedure




1. Connect the electrical connector.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the floor console with the screws.

Tighten the floor console screws to 4 N.m (35 lb in).

3. Install the parking brake cover.
4. Install the floor console cover.




5. Install the gearshift lever boot, if equipped.
6. Connect the negative battery cable.