Sunroof / Moonroof: Service and Repair

Sunroof Module Assembly Replacement

Removal Procedure




Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution).
1. Disconnect the negative battery cable.
2. Remove the headliner. Refer to Headlining Trim Panel Replacement (Service and Repair).
3. Remove the drain hoses.
4. Remove the strap.
5. Disconnect the electrical connector.
6. Remove the bolts and the motor.




7. Disconnect the electrical connector.
8. Remove the strap.
9. Remove the motor control module.




10. Remove the bolts and the sunroof housing from the vehicle.




11. Remove the drain channel.
12. Remove the sunshade.


Installation Procedure




1. Install the sunshade.





Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the sunroof housing.

Tighten the sunroof housing bolts to 7 N.m (62 lb in).




3. Install the motor control module.
4. Manually position the sunroof glass in the fully closed position.





Important: The sunroof motor assembly must be in the fully closed position before installation.


5. Install the motor.

Tighten the sunroof motor screws to 5 N.m (44 lb in).

6. Install the drain hoses.
7. Install the headliner. Refer to Headlining Trim Panel Replacement (Service and Repair).
8. Connect the negative battery cable.