Interior Courtesy Lamp Replacement

Interior Courtesy Lamp Replacement

Removal Procedure




Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution).
1. Disconnect the negative battery cable.
2. Gently pry off the interior courtesy lamp lens by inserting a screwdriver into the recess along the edge of the lens.
3. Remove the screws and the interior courtesy lamp housing from the headliner.




4. Disconnect the electrical connector.
5. Remove the bulb.


Installation Procedure




1. Install a new bulb.
2. Connect the electrical connector.





Notice: Refer to Fastener Notice (Fastener Notice).

3. Install the interior courtesy lamp housing to the headliner with the screws.

Tighten the interior courtesy lamp housing screws to 2.5 N.m (22 lb in).

4. Press the courtesy lamp lens onto the housing.
5. Connect the negative battery cable.