Front Fog Lamp Replacement (Notchback)

Front Fog Lamp Replacement (Notchback)

Removal Procedure




Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution).
1. Disconnect the negative battery cable.
2. Remove the nuts and the engine under cover.




3. Remove the bolts and the resonator.




4. Remove the nuts securing the fog lamp assembly.
5. Remove the fog lamp assembly.
6. Disconnect the electrical connector.
7. Remove the bulb.


Installation Procedure




1. Install the bulb.
2. Connect the electrical connector.

Notice: Refer to Fastener Notice (Fastener Notice).

3. Install the fog lamp with the screws.

Tighten the fog lamp screws to 5 N.m (44 lb in).




4. Install the resonator with the bolts.




5. Install the engine under cover with the bolts.
6. Connect the negative battery cable.