Front Wheel Speed Sensor Replacement

Front Wheel Speed Sensor Replacement

Removal Procedure




Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution).
1. Disconnect the negative battery cable.
2. Disconnect the front wheel speed sensor electrical connector.

Notice: Refer to Vehicle Lifting and Jacking Notice (Vehicle Damage Warnings).

3. Raise and suitably support the vehicle.
4. Remove the bolt and the front wheel speed sensor from the steering knuckle.


Installation Procedure





Notice: Refer to Fastener Notice (Fastener Notice).

1. Install the bolt and front wheel speed sensor to the steering knuckle.

Tighten the bolt to 9 N.m (80 lb in).

2. Lower the vehicle.
3. Connect the front wheel speed sensor electrical connector.
4. Connect the negative battery cable.