Stabilizer Bar: Service and Repair

Stabilizer Shaft Replacement

Removal Procedure




1. Remove the crossmember assembly. Refer to Front Suspension Crossmember Replacement (Service and Repair).
2. Remove the stabilizer bar from the crossmember assembly by removing the U-clamp bolts.


Installation Procedure





Notice: Refer to Fastener Notice (Fastener Notice).

1. Install the U-clamps and the stabilizer bar to the crossmember.

Tighten the U-clamp bolts to the crossmember assembly to 25 N.m (18 lb ft).

2. Install the crossmember assembly. Refer to Front Suspension Crossmember Replacement (Service and Repair).