Clutch Cable: Service and Repair

Clutch Cable Replacement

Removal Procedure




Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution).
1. Disconnect the negative battery cable.
2. Remove the clutch control cable adjusting nut (1).
3. Remove the clutch control cable from the mounting bracket (2).




4. Disconnect the clutch control cable from the clutch pedal.
5. Remove the battery.




6. Remove the clutch control cable to cowl mounting nuts.
7. Remove the clutch control cable.


Installation Procedure





Notice: Refer to Fastener Notice (Fastener Notice).

1. Install the clutch control cable to cowl and install the clutch control cable mounting nuts.

Tighten the nuts 13 N.m (115 lb in).




2. Install the battery.
3. Connect the clutch control cable to the clutch pedal.




4. Install the clutch control cable to the mounting bracket (2).
5. Install the clutch control cable-adjusting nut (1).
6. Adjust the clutch control cable.